Channel Menu; Channel: Page 1 And Page 2 Menus; Channel: Page 1 Menu - Christie CP2000-ZX User Manual

Section 3: Operation

3.4.6 Channel Menu

The Channel menu is a password-protected screen requiring Advanced, Admin or Service permission.
In general, the options available through the Channel menu enable users to tailor projector processing for any
type of incoming source, including 3D material and collect these settings into a unique channel that any user
can select from the Main menu. Up to 64 channels can be defined.

Channel: Page 1 and Page 2 Menus

These two screens consist of numerous display settings that can be adjusted and collectively saved as a custom
setup or channel. Once a channel is defined, it appears as a button on the main screen where it can be quickly
selected by a user to change the on-screen display to suit the source content.

Channel: Page 1 Menu

Current Channel -
select from drop-down
list or enter a new
name.
Source connection
(location).
Packing mode and #
bits of the selected
source.
Other accessible Chan-
nel menus.
3-24
Enabled when a channel is active
(selected). Only one active channel is
allowed at any one time.
Figure 3-17 Channel: Page 1 Menu Options
Always enable for cinema sources.
When enabled, use full cinema processing
and scaling. Use for all cinema sources, plus
DVI sources with vertical frequency 60 Hz.
Enable to use pre-defined
custom PCF settings. Dis-
able for cinema sources.
3D icon that displays if 3D is
set for the current channel.
Reset settings back to fac-
tory default for the current
channel.
Select a source that identi-
fies source resolution,
aspect ratio and offset
(defined in Admin: Source
menu).
Select a screen file that iden-
tifies the display area, mask-
ing (cropping), and
expected lens for current
source (defined in Admin:
Source).
CP2000-ZX User Manual
020-100006-05 Rev. 1 (05-2009)