11.3 Scheduled Servicing Basic Procedure
11.3.1 Scheduled Servicing Chart
The machine does not have items (parts or durables) that require scheduled servicing. To help prolong the life of the
product and its parts, it is recommended that the following be performed at time of a service visit.
Work Procedure
1.
2.
3.
4.
5.
6.
Question key person in charge, and obtain a general idea of the issue.
Make repairs of any faults.
Make test copies, and check the output for the following:
(1) image density against standards, (2) soiling of the background, (3)
clarity of characters, (4) margin, (5) fixing, faulty registration, soiling
of the back of the page.
Standards for Margin (single-sided)
Leading edge: 3.0 -/+ 2.0 mm (0.12" -/+ 0.08")
Left/right edge: 2.5 -/+ 2.0 mm (0.10" -/+ 0.08")
Clean the parts: As needed, remove the cartridge before starting the work.
Make test copies.
Clean up the area around the machine.
T-11-1
As of August 2002
Chapter 11
0006-3069
11-3