Option Power Supply Pcb - Canon imageRUNNER 5065 series Service Manual

[1]
3) Remove the printer power supply PCB [2].
- 14 connectors
- 2 screws [1]

10.5.14 Option Power Supply PCB

10.5.14.1 Before Removing Accessories Power Supply
PCB
iR5065 / iR 5055 / iR5075 / / /
1) Remove the charger unit (this step is necessary only for iR5075 for Japan).
(page 10-20)Reference[Removing the Charger unit]
2) Remove the rear cover (upper). (page 10-11)Reference[Removing the
Rear Cover (Upper)]
3) Detach the rear cover (lower). (page 10-11)Reference[Removing the
Rear Cover (Lower)]
4) Detach the left cover (upper). (page 10-10)Reference[Removing the
Left Cover (Upper)]
5) Detach the left cover (middle). (page 10-12)Reference[Removing the
Left Cover (Middle)]
6) Detach the left cover (lower). (page 10-11)Reference[Removing the
Left Cover (Lower)]
10.5.14.2 Removing Accessories Power Supply PCB
iR5065 / iR 5055 / iR5075 / / /
1) Slide the power cord mount [4].
- 5 screws [1]
- 5 connectors [2]
- 1 edge saddle [3] (free the harness)
[1]
[2] [1]
F-10-75
[1]
[2]
F-10-76
[2]
[1]
2) Remove the power cord mount [2].
- 3 connectors [1]
0015-6607
3) Remove the accessories power supply PCB [3].
- 3 screws [1]
- 3 connectors [2]
0015-5130
[3]
10.5.15 Fixing Heater Power Supply PCB
10.5.15.1 Before Removing Fixing Heater Power Supply
PCB
iR5065 / iR 5055 / iR5075 / / /
1) Detach the left cover (upper). (page 10-10)Reference[Removing the
Left Cover (Upper)]
2) Detach the left cover (middle). (page 10-12)Reference[Removing the
Left Cover (Middle)]
10.5.15.2 Removing Fixing Heater Power Supply PCB
iR5065 / iR 5055 / iR5075 / / /
[1]
[4]
F-10-77
[2] [1]
F-10-78
[2] [1]
[1]
F-10-79
Chapter 10
[2]
[3]
0015-6610
0015-5134
10-23