SKF Multilog On-Line System IMx-M User Manual page 90

Protection
IMx-M Manager
2 - 70
Figure 2 - 41.
Observer Database Connection.

If Observer database connection is ON, IMx-M Manager configurations can
be imported automatically to the Observer database when performing Save
function.

IMx-M configuration file in the Observer database can be sent to IMx-M
manager for updates to the file. This can be done by establishing the Observer
database connection on and Open Project from database to make changes.
It then can be imported back to the Observer database by performing Save
function.

IMx-M Manager can get the Observer database file to save it in the local
file system. It then can be used for analysis and/or distribution. The location of
the saved file is listed in the IMx-M Manager System Log.
Validate
Use this menu option to validate the current project configuration. Although a
validation is always executed prior to saving a configuration, it is still important
to regularly validate an open project.
The validation output has following types:

OK: No validation error found. This configuration can be saved and
downloaded to a protection module.
SKF Multilog On-Line System IMx-M
User Manual