Editing An Existing Project - SKF Multilog On-Line System IMx-M User Manual

Editing an Existing Project

Select Open Existing Project.
As soon as this option is selected, a "File Open" dialog will be launched. Use this dialog
to browse the location of the existing project to open the desired master project file
(*.mhf).
Once the master project file has opened, the IMx-M Manager will launch into its main
view and validate any slot configuration files (.bin) that are present in the project (see
below).
Note on the figure above, that the project is listed as READ ONLY. This status can only
be reset to ADMINISTRATION MODE after the project password has been entered.
SKF Multilog On-Line System IMx-M
User Manual
Figure 2 - 37.
Editing a Project (Master Project File).
Figure 2 - 38.
Viewing an Existing Project.
Protection
IMx-M Manager
2 - 67