SKF Multilog On-Line System IMx-M User Manual page 259

Important - In case of hot-swap of power supplies, read chapter
Supply" thoroughly and understand it.
Important - Different types of Modules must be positioned correctly in the
rack. The positions of the different types of modules are shown in
within Drawings and Connections section.
Important - Due to the physical reason, when mounting a CMM + PRM slot,
must always mount the PRM before the CMM in order to avoid any damages to the
PRM. However, when dismounting a CMM + PRM slot, it must be the other way
around. Must always dismount the CMM before the PRM. Otherwise, the PRM can
be seriously damaged.
SKF Multilog On-Line System IMx-M
User Manual
Hardware
Hardware Maintenance
"Power
Front Panel
4 - 41