Hardware; Software; Maintenance - Thermo Scientific Accela Open Autosampler Hardware Manual

Hardware

Software

Maintenance

Thermo Scientific
Table 22 lists Info functions items for hardware.
Table 22. Info functions items for hardware
Item
CPU SNo
CPU ID
MOTIO ID
Table 23 lists Info functions items for software.
Table 23. Info functions items for software
Item
PAL Firmware
Head Firmware
Terminal FW
Altera Firmware
Table 24 lists Info functions items for maintenance.
Table 24. Info functions items for maintenance (Sheet 1 of 2)
Item
PlgStrokeCnt
PlgStrokeLim
Description
The serial number (S/N) of the PCB APR CPU is displayed.
Version number of the PCB APR CPU.
Version number of the PCB APR CPU.
Description
Firmware level of PAL System
Version level of the firmware PAL Injection Unit
Version level of the firmware PAL Terminal
Version level of the Altera component firmware
Description
A counter for syringe plunger movements. The actual number of
strokes is displayed. If the counter reaches the set limit
(PlgStrkeLim), a warning is displayed at the next start of a job
(run). The system continues but signals the user to verify syringe
conditions. You can restart the counter by setting it back to zero.
A Syringe has only one counter. If you change syringe types, the
system continues to count as if it were the same type.
Sets an upper limit for the syringe plunger strokes.
3
Operating the Accela Open Autosampler
Accela Open Autosampler Hardware Manual
Info Functions
69