Thermo Scientific Accela Open Autosampler Hardware Manual page 139

Thermo Scientific
a
Table 40. System items (Sheet 3 of 3)
Item
GC-Inj
GC-InS
GC-Dual
HS-Inj
SPME
TTS
Sotax
a
Items displayed in italics are available beginning with PAL Firmware level 4.1
Note You can select and activate standard injection cycles directly from the Accela Open
Autosampler. You must program any deviation from a standard cycle, such as a Cycle
Composer Macro or Cycle Editor (ICC-CE) Cycle, for customized requirements.
Note In PAL Firmware levels < 4.0 the standard cycles are grouped in the Cycles item.
Description
The standard cycle for the GC technique. For details, see
Firmware Overview" on
The standard cycle for the GC Sandwich technique. For details,
see "PAL Firmware Overview"
The cycle for the GC technique that allows the injection of two
samples in two different injectors. The start signal is sent after
both sample solutions are injected.
For details, see "PAL Firmware Overview"
to Chapter 5 in the Accela Open Autosampler User Guide for LC
Devices.
The standard cyle for the GC headspace technique.
For details, see "PAL Firmware Overview"
to Chapter 5 in the Accela Open Autosampler User Guide for LC
Devices.
The standard cycle for the GC SPME technique, solid phase
micro extraction, and fiber techniques. For details, see
Firmware Overview" on
These two cycles are dedicated cycles for dissolution applications.
The TTS cycle is used for transdermal patches and the Sotax cycle
is used for tablet dissolution.
A
Reference Information
page 136.
on page 136.
on page 136
on page 136
page 136.
.x
.
Accela Open Autosampler Hardware Manual
Special Functions
"PAL
and refer
and refer
"PAL
121