Setting Up The Hardware; System Arrangement - Thermo Scientific Vanquish VH-D10 Operating Manual

5 • Installation
5.5

Setting Up the Hardware

5.5.1

System Arrangement

Page 52
This section describes how to set up the hardware and provides
information about the device connectors and cables.
The device is part of the Vanquish system. The system modules are
typically arranged in a system stack, with the arrangement depending on
the system configuration.
Figure 8: Vanquish system, standard configuration (example)
No. Description
1 Solvent Rack
2 Detector
3 Autosampler
4 Pump
5 System Base
6 Column Compartment
For instructions on how to set up the system stack, refer to the Vanquish
System Operating Manual.
Diode Array Detectors (VH-D10)
Operating Manual