Setting Up The Hardware; System Arrangement - Thermo Scientific VF-F20-A Operating Manual

5.5

Setting Up the Hardware

5.5.1

System Arrangement

Integral Fraction Collector FT (VF-F20-A) Operating Manual
This section describes how to set up the hardware and provides
information about the device connectors and cables.
The device is part of the Vanquish system. The system modules are
arranged in a system stack, with the arrangement depending on the
system configuration and the lab environment. For reducing the overall
height of the system, a two-stack configuration is recommended. Two
stacks require a second System Base. A second Solvent Rack can be
added optionally.
Figure 19: Vanquish system, standard configuration (examples): left -
one stack, right - two stacks
No. Description
1 Solvent Rack
2 Detector
3 Fraction Collector
4 Autosampler
5
No. Description
5 Pump
6 System Base
7 Column Compartment
•
Installation
Page 63