System Synchronization Connections - Thermo Scientific Accela Open Autosampler Hardware Manual

System Synchronization Connections

Thermo Scientific
The system interconnect cables and adapter cables that synchronize the run signals for an LC
or LC/MS system with an Accela Open Autosampler depend on the Accela pump model, the
mass spectrometer model, and whether the LC system includes an Accela detector.
Table 5 lists the system interconnect and adapter cables that Thermo Fisher Scientific supplies
with the Accela Open Autosampler or by special order.
Table 5. Accela Open Autosampler contact closure and adapter cables
Cable description
Accela Open
Autosampler system
interconnect cable
(supplied with
autosampler)
Accela detector and
MS detector
adapter cable
(supplied with
autosampler)
Accela Pump
adapter cable
(available by special
order)
Note Thermo Fisher Scientific has discontinued the Accela Pump.
For instructions on how to connect the required cables listed in
Open Autosampler User Guide.
Part number Use
60157-63024 Required for all hardware configurations
60157-63026 Required for hardware configurations that
include one or more of the following:
• Accela detector
• TSQ or Exactive mass spectrometer
60157-63022 Required for the Accela Pump
2
Installing the Accela Open Autosampler
System Synchronization Connections
Table 5, refer to the Accela
Accela Open Autosampler Hardware Manual 39