Thermo Scientific Accela Open Autosampler Hardware Manual page 64

2
Installing the Accela Open Autosampler
Accela Open Autosampler Object Positions
Wash Station: Wash1/Wash2 Reference Point
46 Accela Open Autosampler Hardware Manual
Figure 40 shows the Wash Station Wash1/Wash2 reference point.
Figure 40. Wash station Wash1/Wash2 reference point
For a fast wash station, the reference positions are the two holes in the wash vial caps
(Figure 40). Be sure to center the lower needle guide in these holes with the bottom of the
lower needle guide lightly touching the surface of the wash station assembly.
For the DLW Wash Station option, the reference positions for Wash1 and Wash2 are the two
holes on top of the wash station assembly. See
Center the lower needle guide in these holes with the bottom of the lower needle guide lightly
touching the surface of the wash station assembly.
Figure 41. DLW Wash Station Wash1/Wash2 reference point
Figure 41.
Thermo Scientific