Installing The Pal Object Lists; Getting Started With Pal Object Manager - Thermo Scientific Accela Open Autosampler Hardware Manual

Installing the PAL Object Lists

Getting Started with PAL Object Manager

Thermo Scientific
 To install the Object Manager software to the local hard drive
1. Put the Object Manager CD in your computer.
2. To start the installation, double-click the PAL Object Manager setup.exe file.
The installation wizard begins installing the software.
3. If there is no change to the proposed installation path, install the software to the default
location:
C:\Program Files\PAL\Object Manager
After installing the Object Manager software, install the PAL Object Lists folder. This folder
contains all PAL firmware object lists in alphabetical order by class, for example, syringes,
trays, and wash stations.
Install the PAL object lists folder in the same directory as the PAL Object Manager software.
 To install the PAL Object Lists folder
1. Find the Pal Object Lists folder on the CD.
2. Copy the folder and paste it into the same folder on your hard drive where the PAL
Object Manager resides. The default location is C:\Program Files\PAL\Object Manager.
This section describes how to get started with PAL Object Manager software.
• Setting Up the Communication Mode
• Troubleshooting the Serial Communication Mode
C
PAL Object Manager
Getting Started with PAL Object Manager
Accela Open Autosampler Hardware Manual 181