2
Installing the Accela Open Autosampler
Installing the Autosampler and DLW
16
Accela Open Autosampler Hardware Manual
4. Using the supplied M5
(Figure
6).
Figure 6.
Installing the cool stack to the table
5. Using the supplied M5
Open Autosampler itself to the opposite side of the cool stack
8 mm pan head screws (qty 4), secure the cool stack in place
×
M5
8 mm pan head screws
×
8 mm pan head screws (qty 2), attach the remaining leg for the
×
(Figure
6).
Thermo Scientific