Installing Pal Object Manager; Verifying System Requirements; Installing The Object Manager Software To The Local Hard Drive - Thermo Scientific Accela Open Autosampler Hardware Manual

C
PAL Object Manager

Installing PAL Object Manager

Installing PAL Object Manager

Verifying System Requirements

Installing the Object Manager Software to the Local Hard Drive

180 Accela Open Autosampler Hardware Manual
Installing PAL Object Manager software requires three steps.
• Verifying System Requirements
• Installing the Object Manager Software to the Local Hard Drive
• Installing the PAL Object Lists
Before installing the PAL Object Manager software, your system must meet these minimum
requirements (Table 49).
Table 49. System requirements for PAL Object Manager
System Minimum requirements
Software PAL Object Manager software is compatible with these Windows operating
systems:
• Microsoft Windows 2000
• Microsoft XP Professional (Service Pack 2)
• Microsoft Vista Enterprise (Service Pack 1)
• Windows 7 beta build 7000, preliminary tests fulfilled.
Hardware For serial control communication from the computer to Accela Open
Autosampler, use one of these crossed-wiring serial cables provided with the
Accela Open Autosampler:
• P/N 00950-01-00332 (cable length, 3 meters)
• P/N 00950-01-00333 (cable length, 6 meters)
If the desktop or laptop computer has no serial port (COM port) installed,
use a conversion adapter USB/Serial.
The PAL firmware objects are grouped in various folders that must be linked to the Object
Manager software. To avoid any conflicts with the link, load the software to your local hard
drive before copying the object folders.
You must have administrative rights to install the software.
Thermo Scientific