Thermo Scientific Accela Open Autosampler Hardware Manual page 51

Thermo Scientific
3. Tighten the knurled screw to fix the holder assembly to the syringe slider
Figure 26. Fixing syringe holder to syringe slider
4. Move the plunger up (plunger holder) until the thread of the screw catches the thread of
plunger bushing. Tighten the screw to fix the plunger holder
Figure 27. Connecting the DLW Syringe plunger holder
2
Installing the Accela Open Autosampler
Installing the Autosampler and DLW
(Figure 27).
Accela Open Autosampler Hardware Manual
(Figure 26).
33