Logfile; Info Functions - Thermo Scientific Accela Open Autosampler Hardware Manual

3
Operating the Accela Open Autosampler

Logfile

Logfile

Info Functions

68 Accela Open Autosampler Hardware Manual
Table 21 lists the items you can select to change the tools configuration.
Table 21. Tools items
Item
Teach Point
ToolOffset X
ToolOffset Y
ToolOffset Z
You cannot directly read the PAL logfile on the terminal display. However, the F3 function
key does support printouts. You must have a serial printer connected to port SER2 for the
PAL System and to port SER1 for PAL-xt system. If a serial printer is not available, use a serial
or parallel converter.
Info functions, selectable from the Menu screen
information. These Info functions are available for the hardware, software, maintenance, free
objects, and free items.
All items with the exception of maintenance are read-only.
Figure 54. Selecting Info functions
Description
The reference point at which to teach the Object (Tool;
MHETool) is selectable. The MHETool needs no extra position.
The Parking Station is the fix point. Select None.
Corrects the ideal x position of the MHETool if necessary.
Corrects the ideal y position of the MHETool if necessary.
Corrects the ideal z position of the MHETool if necessary. You
must have a ToolOffsetZ of –48.0 mm to position the MHETool
on the sample vial.
(Figure 54), provide quick access to viewable
Thermo Scientific