Thermo Scientific Accela Open Autosampler Hardware Manual page 25

Table 2. Accela Open Autosampler specifications (Sheet 2 of 3)
Component
Wash station
Wash station
Thermo Scientific
Specification
Fast wash station with two different wash DLW Pumps:
• Two pieces. solenoid diaphragm pump
• Self-priming
– Flow rate range:
100 mL/min at atmospheric pressure
(Pump itself, no connections to HPLC system)
– Wetted parts:
Pumps: Ryton PPS, and Kalrez (FFPM)
• Transfer tubing kit:
Two pieces. PFA tubes 1/8 in. including connection fittings
• Solvent Reservoir:
1000 mL borosilicate glass including 10 μm solvent filter
• DLW Wash Station:
– Wash station with two solvent ports and one waste port.
– Two additional horizontal waste inlet ports in front to be combined with
valve waste port.
• Wetted parts:
– Wash station block: PVDF; inserts: sst 1.4404
– Connections at bottom of inserts: PEEK™
Waste tube: Polyethylene (PE)
Accela Open Autosampler Hardware Manual
1
Introduction
Specifications
7