Thermo Scientific Accela Open Autosampler Hardware Manual page 185

Thermo Scientific
Figure 87. Starting the backup process with serial communication type
Note The displayed baud rate in this example of 38400 is the baud rate last used. Do
not confuse this with the COM port setting, which is a baud rate of 9600. The
application optimizes the speed, depending on work load and processor capabilities.
The dynamic increase in the baud rate can reach as high as 115 200. The last used
baud rate writes back to the PAL Loader INI file. Opening this window from the PAL
Loader application displays this last used rate.
6. Activate the process by clicking Start Backup
takes approximately 3–5 minutes.
Figure 88. Backup process for serial communication completed
PAL Loader Software Operation
(Figure 88). The process is initialized and
Accela Open Autosampler Hardware Manual
B
PAL Loader
167