Setup Functions; Sounds; Time - Thermo Scientific Accela Open Autosampler Hardware Manual

Setup Functions

Sounds

Time

Thermo Scientific
The Setup functions, selectable from the Menu screen
functions for the PAL System. The Sound, Time, and Objects are basic functions that you use
at installation or if changes have been made over time.
Figure 55. Selecting Setup functions
Table 25 lists Setup functions for Sounds.
Table 25. Setup functions for Sounds
Item
Message Box
Warn Move
End Cycle
End Job
Table 26 lists Setup functions for Time.
Table 26. Setup functions for Time (Sheet 1 of 2)
Item
Year
Month
Day of Month
Description
A specific dual beep tone signals that a message box for user
intervention appears on the screen. You can turn this beep signal
on or off.
Sounds a beep at the start of the PAL movement. Keep this
function turned on for safety reasons.
Sounds a beep at the end of a cycle. Select as desired.
Sounds a beep at the end of a job. Select as desired.
Description
Sets the year for the PAL internal clock.
Sets the month for the PAL internal clock.
Sets the day for the PAL internal clock.
3
Operating the Accela Open Autosampler
(Figure 55), allow access to various
Accela Open Autosampler Hardware Manual
Setup Functions
71