Thermo Scientific Accela Open Autosampler Hardware Manual page 38

2
Installing the Accela Open Autosampler
Installing the Autosampler and DLW
20 Accela Open Autosampler Hardware Manual
Figure 11. Inserting the injection unit mounting Torx screws
5. Install the two remaining Torx screws, B and C, in the left and right mounting holes,
respectively. You might have to move the elastic cord slightly to the left to insert Torx
screw C into the right hole.
Figure 12 shows the completed installation.
Figure 12. Open Autosampler with injection unit
Thermo Scientific