Dlw Syringe Holder Assembly; Dlw Option Spare Parts Ordering Information - Thermo Scientific Accela Open Autosampler Hardware Manual

DLW Syringe Holder Assembly

DLW Option Spare Parts Ordering Information

Table 35. DLW option spare parts ordering information (Sheet 1 of 5)
Part name/number
DLW Pump Module
00950-01-00310
00950-01-00311
Thermo Scientific
You can exchange the following parts individually from the DLW syringe holder assembly:
• DLW syringe holder assembly (complete assembly)
• DLW needle adapter block
• DLW needle holder assembly
• Holding loop
• DLW manifold
(Entire unit assembled, consisting of DLW solvent selector and DLW syringe adapter
with Perfluor O-ring installed)
• DLW flow diverter
• DLW actuator/solenoid
• DLW actuator control PCB (incl. cable)
• DLW syringe holder fixation screw
Table 35 contains spare parts ordering information for the DLW option.
Description
PAL DLW Pump Kit (single module),
incl. electrical connections, 24 V
Aspiration Tube Kit, consisting of:
• 1 pc. Tube PFA
• 1 pc. PEEK solvent filter 10 μm
• 1 pc. Plug with feed through hole
7
DLW Syringe Holder Assembly
Illustration
Accela Open Autosampler Hardware Manual
Replaceable Parts
103