Thermo Scientific Accela Open Autosampler Hardware Manual page 193

Thermo Scientific
A confirmation box opens
Figure 97. Confirmation for the reset process
4. Click Yes to continue the reset process. A second window appears with instructions to
manually turn off and on the power of the PAL-xt System
Figure 98. Instructions to force the PAL-xt System into Loader Mode
5. Click Cancel.
After successful activation of the Loader Mode, the communication type changes
automatically to Serial Communication. A beep tone signals the completion of the reset
procedure.
The PAL-xt System is now prepared to perform a PAL Firmware update.
(Figure 97).
Accela Open Autosampler Hardware Manual
B
PAL Loader
Troubleshooting
(Figure 98).
175