Thermo Scientific Accela Open Autosampler Hardware Manual page 69

Thermo Scientific
Figure 47. Flow path of standard LC injection valve (Cheminert type)
Table 6 lists the specifications for a standard LC injection valve.
Table 6. Standard LC injection valve specifications
Component
Valco/VICI Cheminert
Stator material
Rotor material
Port size
Fittings
Actuator
Loop size
Bore size
Port to port volume
Note Sample loops of the different valve types are not interchangeable.
2
Installing the Accela Open Autosampler
Specification
Flat plate rotary valve
Stainless steel 316
Valcon H (inert mix-polymer)
1/16 inch
Valco 1/16 inch ferrules and nuts
PAL valve drive (micro-electric actuator)
20 μL (shipped), other loop sizes available
0.25 mm
320 nL for vertical port, 75 nL for standard ports, 75 nL
for engraving
Accela Open Autosampler Hardware Manual
Injection Valve
51