Misc Menu Operations; Port Settings For Control From An External Device - Sony MVS-6000 User Manual

Misc Menu Operations

In the Misc menu, you can carry out the following operations.
• Enabling and disabling operation from an external device, System Manager,
• Enabling and disabling side flags on the background bus of each of the M/E-
• Switching the safe title function on or off for each switcher output.
• Displaying the transition rate, independent key transition rate, and fade-to-

Port Settings for Control From an External Device

Enabling or disabling control from an external device
1
2
318

Misc Menu Operations

or an editing keyboard.
1 and PGM/PST banks.
For the side flag function, see "Side Flags" (page 352).
black transition rate for each of the M/E and PGM/PST banks, and changing
the settings.
In the menu control block, press the top menu selection button [MISC],
then select VF1 'Enable' and HF1 'Port Enable.'
The Misc >Enable >Port Enable menu appears with the status area
showing the settings of the following ports.
• Switcher Remote 1 to Remote 2 ports (RS-422A, D-sub 9-pin)
• Switcher GPI port (parallel, 25-pin)
• DME1/DME2 Editor ports (RS-422A, D-sub 9-pin)
• DME1/DME2 GPI ports (parallel, 25-pin)
In the <Switcher> or <DME> group, press on the name of the port for
which you want to disable control from an external device, turning it off.
To re-enable control for the port, press on its name once more.
Notes
• It is not necessary to make any settings for DME2.
• For the AUX bus operation from the Remote1 to Remote2 ports of the
switcher, the setting (Enable/Disable/Manual) in the Setup menu takes
precedence. Only when the setting is "Manual," the settings made in the
Port Enable menu apply.
For details, see "Interfacing With External Devices (Device Interface
Menu)" in Chapter 19 (Volume 3).