Brick Settings - Sony MVS-6520 User Manual

Crossing images from channels 5 and 6,
and channels 7 and 8 in three dimensions
Notes
Three-dimensional image crossing is not supported on the
MKS-6570 or MVE-8000A.
1
In the Global Effect >Ch5-Ch8 >Combiner Priority
menu (4221), press [Combiner1 Depth], turning it on.
2
Adjust the following parameter.
No. Parameter Adjustment
1 Soft1 Softness of edges of channel 5
and channel 6 crossed section
3
Press [Combiner2 Depth], turning it on.
4
Adjust the following parameter.
No. Parameter Adjustment
1 Soft2 Softness of edges of channel 7
and channel 8 crossed section

Brick Settings

Brick allows you to create a rectangular parallelepiped by
using images of three consecutive channels.
The Brick effect can combine Ch5, Ch6, and Ch7, or
combine Ch6, Ch7, and Ch8. The three images are
displayed as shown in the following figure.
Combination of Ch5, Ch6, and Ch7
Upper side: Ch5 image
Side V: Ch6 image
Side H: Ch7 image
Combination of Ch6, Ch7, and Ch8
Upper side: Ch6 image
Side V: Ch7 image
Side H: Ch8 image
You can adjust the height of the brick, the overlap between
the three images and the way to insert the side images.
Applying the Brick effect
1
Open the Global Effect >Ch5-Ch8 >Brick menu
(4222).
2
Press [Brick], turning it on.
The Brick effect is enabled, and a rectangular
parallelepiped (brick) showing the images of three
channels appears. You can adjust parameters for the
height of the brick and the overlap between the three
images.
Notes
• When the Brick effect is enabled, the Z-axis position
shifted by the amount of half the height. Therefore,
the image is somewhat magnified.
• The flex shadow function
enabled when Brick is enabled.
3
Set the following parameters.
No. Parameter Adjustment
1 Height Height of brick
2 Front Front overlap
Overlap
3 Side H Side H overlap
Overlap
4 Side V Side V overlap
Overlap
4
Specify the way to insert the side images when the
height is changed by pressing one of the following
buttons in the <Side V> group or the <Side H> group.
Crop: Crop the parts that do not fit into the side
without shrinking the picture. You can set the
following parameters.
No. Parameter Adjustment
1 H Crop position on left side
2 V Crop position on top side
3 Rotation
Angle of rotation, when rotated
around the Z-axis of the source
space
The set position becomes the upper left corner of Side
V or Side H. The right and bottom sides of the inserted
image are set automatically.
Compress: Images are inserted after being
compressed. You can set the following
parameters.
No. Parameter Adjustment
1 Top Crop position on top side
(1 p. 178) cannot be
223
Global Effect Operations