Circle Settings - Sony MVS-6520 User Manual

2
Set the following parameters.
No. Parameter Adjustment
1 H Horizontal lens center position
2 V Vertical lens center position

Circle Settings

You can set the size of the circle, and make the axis of
modulation vertical.
Applying the Circle effect
In the Non Linear >Circle menu (4141.17), set the
following parameter.
No. Parameter Adjustment
1 Radius Size of circle
To make the axis of modulation vertical
Press [Mod V], turning it on.
The axis of modulation when converting to the circle
becomes vertical.
Panorama Settings
You can set the horizontal and vertical curve ratio, and the
curve center position.
Applying the Panorama effect
In the Non Linear >Panorama menu (4141.18), set the
following parameters.
No. Parameter Adjustment
1 Curve H Horizontal curve ratio
2 Curve V Vertical curve ratio
3 Position H Horizontal curve center position
4 Position V Vertical curve center position
Page Turn Settings
There are four modes: H&V, H, V, and Off. You can select
the turn position, the radius of the turned portion, the
amount and angle of turning, and the input video for the
front and back pages.
Applying the Page Turn effect
1
In the <Split Mode> group of the Non Linear >Page
Turn menu (4141.19), select the split mode.
H&V: The image turns as it is split from the center
into 4 parts: left, right, upper, lower.
H: The image turns as it is split from the center into 2
parts: left, right.
V: The image turns as it is split from the center into 2
parts: upper, lower.
When nothing is selected (Off): There are no splits
and the image turns from the edge.
2
Press [Page Turn], then set the following parameters.
No. Parameter Adjustment
1 Radius Radius of turn part
2 Offset Amount of turn
3 Angle Angle of turn
To set the input signal of the back page
1
In the <Back Video> group, select the signal input into
the back page.
Self: Use the same signal as the front page.
Flat: Use a flat color.
Hue Rotation: Gradually vary the hue.
2nd Ch: Use the 2nd channel video signal.
To select "2nd Ch," it is first necessary to select
the 2nd-channel DME.
1 "Applying a DME Effect to a Key"
For details,
1 "Selecting the DME channel" (p.
(p. 91),
1 "Combiner operations" (p.
and
2
Adjust the following parameters, according to the
selected input signal.
When Flat is selected
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
When Hue Rotation is selected
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Speed Speed at which hue changes
Notes
When using a page turn effect with one channel, the
following restrictions apply.
• In an MKS-6570 or MVE-8000A HD system, parts of
the back page other than the title appear as black when
the input is, for example, a title.
Applying Special Effects (Nonlinear Effect Settings)
94),
221).
199