Table Of Contents - Beckman Coulter Power Express Instructions For Use Manual

CHAPTER 1:
CHAPTER 2:
CHAPTER 3:
B31451AE
Revision History, iii
Warranty and Service, vii
Safety Notice, ix
Introduction, xxiii
Inlet and Outlet Module
Introduction, 1-1
Dynamic Inlet Module, 1-1
Inlet Rack Type, 1-4
Dynamic Inlet Error
Bulk Inlet Module, 1-9
Outlet Module, 1-11
Outlet Racks, 1-12
Inlet and Outlet Module
Introduction, 2-1
Load Sample Tubes into the Inlet
Load Racks into the Inlet
System-Initiated Rack
Operator-Initiated Rack
Selecting Remap Destination at the Inlet Control Panel (V3.0 and
Later), 2-4
Selecting Inlet Module
Enable or Disable Lanes at the Inlet, Error Lane, or Bulk
Load Sample Tubes in Bulk
Clean the Bulk Inlet Module, 2-9
Remove Sample Tubes from the Error
Mirror Cleaning, 2-12
Unload the Outlet Module, 2-14
System-Initiated Rack
Operator-Initiated Rack
Error Recovery Procedures, 3-1
Introduction, 3-1
Error Recovery General
Inlet, Outlet and Error Lane Function
Function Code
General Error
System Error Recovery
Gripper Finger Error
Jammed Sample Tube Carrier
Bypass a Module
Description, 1-1
Lane, 1-5
Procedures, 2-1
Racks, 2-1
Module, 2-2
Change, 2-2
Change, 2-3
Priority, 2-5
Inlet, 2-8
Lane, 2-11
Change, 2-14
Change, 2-15
Information, 3-2
Procedure, 3-3
Recovery, 3-3
Procedures, 3-4
Recovery, 3-4
Recovery, 3-4
Procedure, 3-5
Contents
Inlet, 2-7
Codes, 3-2
xxi