Table of Contents
Advertisement
Inspecting the Package
The StatSpin Express 4 and its accessories are delivered in one carton. If the centrifuge or
accessories have suffered any damage in transport, inform your carrier immediately.
Note
Save shipping carton and components to simplify return if service is required.
Confirming the Contents
The package contains:
• One StatSpin Express 4 horizontal centrifuge (Product No. SSH4)
• One centrifuge rotor (Product No. RTH8)
• Eight rotor inserts for 13x100 mm tubes (Product No. SV09)
• Eight rotor inserts for 16x100 mm tubes (Product No. SV07)
• One line cord for use in North America only.
• One Instructions for Use Manual
• One manual latch release tool
• One 1/8 inch hex key
Installing the System
1
Place the centrifuge on a solid level surface suitable for operation of laboratory
instrumentation.
2
Position the StatSpin Express 4 away from direct sunlight and sources of heat or cold.
3
For the acceptable range of operating temperature and humidity, refer to Specifications.
4
Remove the packaging around the rotor and in the lid before operating the centrifuge.
Connecting the Power
1
Plug the centrifuge into a grounded outlet supplying 100-240 V @ 50-60 Hz.
55-006276-001CC
Caution
During operation maintain a 30 cm (12 inch) clearance around the centrifuge. The
clearance must be free from obstruction and away from the edge of the surface
that the centrifuge is on.
CHAPTER 1
Installation
1-1
Hide quick links:
Advertisement
Table of Contents
