Beckman Coulter Power Express Instructions For Use Manual page 114

Troubleshooting
Error Code Tables
Table 4.7 Outlet Error Codes (Continued)
Sensor
SL006 ON
SL006 OFF
SL007 ON
SL007 OFF
SL021 ON
SL021 OFF
SL022 ON
SL022 OFF
SL023 ON
SL023 OFF
SL041 ON
SL041 OFF
4-38
Problem
Locking cylinder error. The
cylinder that locks the left
drawer lock is not working
correctly.
ON error: The cylinder does
not respond correctly to an
ON signal from a PLC.
OFF error: The cylinder
does not respond correctly
to an OFF signal from a PLC.
Locking cylinder error. The
cylinder that locks the right
drawer lock is not working
correctly.
ON error: The cylinder does
not respond correctly to an
ON signal from a PLC.
OFF error: The cylinder
does not respond correctly
to an OFF signal from a PLC.
Stopper error. The stopper
is not working correctly.
ON error: The cylinder does
not respond correctly to an
ON signal from a PLC.
OFF error: The cylinder
does not respond correctly
to an OFF signal from a PLC.
Locking cylinder error. The
cylinder that locks the rear
door lock is not working
correctly.
ON error: The cylinder does
not respond correctly to an
ON signal from a PLC.
OFF error: The cylinder
does not respond correctly
to an OFF signal from a PLC.
1. Confirm that the drawer is fully closed.
2. Confirm that the cylinder is getting enough air.
3. Confirm that the cylinder motion sensor is working
correctly.
1. Confirm that the drawer is fully closed.
2. Confirm that the cylinder is getting enough air.
3. Confirm that the cylinder motion sensor is working
correctly.
1. Confirm that a carrier is not jammed or stuck.
2. Confirm that the air compressor is on and the auto switch
is working correctly.
3. Confirm that the compressed air supply is within the
normal pressure range.
4.
Restart
Select on the control panel to resume
operation.
Confirm that the air compressor is on and the auto switch turns
on when the gripper is open.
Solution
B31451AE