Inlet And Outlet Module Recovery Procedures - Beckman Coulter Power Express Instructions For Use Manual

i.
On the Centrifuge control panel (not the D-Lane control panel), select Restart
start centrifugation.
j. Wait for the centrifuge to complete processing.
k. On the Centrifuge control panel, select and hold Unlock
lid.
l. Lift the centrifuge cover, then lift centrifuge lid.
m. Unload and replace balance tubes in the original position if necessary.
n. Unload the centrifuged sample tubes into the sample tube carriers in the Centrifuge
track queue (D-Lane).
o. Firmly press down on the centrifuge lid with the palms of your hands to close the
centrifuge lid.
p. Close the centrifuge cover.
q. Perform this procedure on the Centrifuge D-Lane control panel. Select Maintenance
r. Select the number field to display the onscreen keyboard.
s. Enter function code 84 and select Enter
t.
After the tubes have exited the Centrifuge track queue, select Enter
u. Select Auto
27
Confirm all system modules are in Run mode. Select Auto
processing, if necessary.

Inlet and Outlet Module Recovery Procedures

This section provides information to identify and resolve errors related to the Inlet and
Outlet modules. Inlet and Outlet error recovery procedures include:
• Inlet Module Error Recovery Procedure
• Error Lane Module Error Recovery Procedure
• Bulk Inlet Module Error Recovery Procedure
• Outlet Module Error Recovery Procedure
• Tube Held Recovery Procedure
• T-Lane Module Error Recovery Procedure
B31451AE
Note
If the Centrifuge control panel does not display the Restart
Unlock , open and then close the top cover and then select Restart
start centrifugation.
on the control panel.
and OK
Inlet and Outlet Module Recovery Procedures
twice.
to resume operation.
Error Recovery Procedures
icon, select Top
to
to unlock the Centrifuge
and Exit
and OK to resume
3
to
.
3-17