Intended Use
Power Express is a high-speed, automated sample handling system that processes sample
tubes from pre-analytical sample tube preparation to presentation of sample tubes into
racks. Power Express can be configured with optional hardware to support sample tube
processing on connected analyzers.
Power Express performs all pre-analytical sample tube preparation, and then routes the
sample tubes directly to connected analyzers for testing. The tubes can subsequently be
routed to other connected analyzers for additional testing and to connected post-analytical
modules.
Scope of this Manual
This Instructions For Use manual is for the Power Express Inlet and Outlet module. This
manual contains information and instructions to perform Power Express Inlet and Outlet
module operations and troubleshooting functions.
Note
Follow all safety cautions and warnings noted in this manual.
This manual is part of the Power Express Instructions for Use document set and covers
only the Power Express Inlet and Outlet module. For information and instructions for other
Power Express modules, refer to the appropriate Power Express manual from the list
below.
Power Express Instructions for Use Document Set:
•
General System Operation IFU, PN B31448
•
Inlets and Outlets Modules IFU, PN B31451
•
Centrifuge Module IFU, PN B31456
•
Decapper and Recapper Modules IFU, PN B31450
•
Aliquot Module IFU, PN B31449
•
Rack Builder Modules IFU, PN B31455
•
Direct Track Sampling Modules IFU, PN B31453
•
Storage Modules IFU, PN B31452
•
Cennexus IFU, PN B19606
B31451AE
Introduction
xxiii