Xerox WorkCentre 5790 Series Service Manual page 47

Tray 3 ground contact spring.
Figure 13 Tray 3 ground contact spring
Xerox® WorkCentre® 5790 Family
Refer to Figure 14. Open tray 3, check for continuity of less than 1 ohm between the tray 3
metal side wall and the main frame ground connection. To improve continuity, remove, clean
and re-assemble the grounding spring to improve continuity. Also clean the contact area on the
metal side wall.
Figure 14 Tray 3 grounding spring
May 2013
2-15
Tray 3 grounding
spring.
Status Indicator RAPs
01A