Table of Contents
Advertisement
SCP 6 Final Actions
Use the Final Actions to verify the total operation of the system. Use the Final Actions to com-
plete the service call.
Procedure
Perform the steps that follow. If a fault is identified, go to
1.
If necessary, restore the NVM to the machine. Go to
Tools.
2.
Perform
GP 19
Network Clone Procedure.
NOTE: The clone file will need to be taken whenever the system software is changed.
3.
Go to
SCP 5
Subsystem Maintenance.
4.
To clear all fault counters, go to
GP 1
5.
Operate the machine in all modes. Make the copies and prints from all trays, use the
DADH and the document glass.
6.
Make copies and / or prints from all trays and check the registration and copy quality. To
reset the registration, go to
dC604
defects, go to
IQ1
Image Quality Entry RAP.
7.
Make a proof copy or print of a customer document.
8.
If some of the customers selections were changed, return the selections to the customer
settings.
9.
Mark off the hardware options, software options or Tags installed on the Tag matrix cards,
dC111.
10. If some changes were made to the configuration or options were added, print the configu-
ration report. Store the configuration report with the machine log book. Discard the previ-
ous version of the configuration report.
11. Remove and destroy all copies of test patterns.
12. Make sure the machine and service area are clean.
13. If necessary, provide the customer with training.
14. At the completion of the service call report the three billing counters in order, billing
counter C13, billing counter C1 and billing counter C2.
Xerox® WorkCentre® 5790 Family
SCP 4
Fault Analysis:
GP 5
Portable Workstation and
Diagnostics Entry, Facilities and Exit.
Registration Setup Procedure. For copy quality
SCP 7 Machine Features
Configuration Options
The WorkCentre 5790F is available as a basic machine with trays 1, 2 and a bypass tray. It is
also available in various configurations using the options that follow:
General
For the space requirements, environment range and the print out time. Refer to:
•
GP 21
Installation Space Requirements
•
GP 23
Environmental Data.
•
GP 25
First Copy / Print Out Time and Power On / Off Time.
Paper supply and paper handling options
•
3600 sheet high capacity feeder (tray 3 and 4) W/O
•
3600 sheet high capacity feeder (tray 3 and 4)
•
(35 ppm) 75 sheet duplex automatic document handler (DADH).
•
(40-90 ppm) 100 sheet duplex automatic document handler (DADH).
•
4100 sheet high capacity feeder (tray 5).
Output options
•
500 sheet offsetting catch tray (OCT).
•
1250 sheet 2 bin stapler stacker tray (1K LCSS).
•
2250 sheet 2 bin stapler stacker tray (2K LCSS).
•
3000 sheet 2 bin stapler stacker with 100 sheet finishing (HVF).
•
250 sheet post print inserter, PPI (HVF)
•
2000 sheet 2 bin stapler stacker with booklet maker (HVF BM).
•
2000 sheet 2 bin stapler stacker with tri-folder (HVF).
Accessories and Kits
•
50 sheet convenience stapler.
•
Tray 5 Short edge reg kit (A4 / 8.5x11 inch SEF).
•
Tray 5 Short edge reg kit (A3 / 17 inch SEF).
•
Envelope kit.
•
Assistive UI kit (Xerox copier assistant).
•
Server Fax kit.
•
2 hole punch kit.
•
Legal 2 hole punch kit.
•
3 hole punch kit.
•
4 hole punch kit.
•
Swedish 4 hole punch kit.
•
Internet Fax kit.
•
1 Line Fax kit.
•
2 Line Fax kit.
•
Network accounting kit.
•
Scan to file and scan to E-mail.
•
Scan to PC desktop SE - standard.
•
Scan to PC desktop SE - professional.
May 2013
1-9
TAG
151.
W/TAG
151.
Service Call Procedures
SCP 6, SCP 7
Advertisement
Chapters
Table of Contents
