Telestream Lightspeed Live Capture User Manual page 73

Live Store Name
LSL-01 Local Live Store
LSL-02 Local Live Store
LSL-03 Local Live Store
d. Create authorization entries in the Vantage Management Console > Settings and
Options > Authorization tab for each Live Store UNC path alias. Then put all
services into Maintenance Mode and exit them again to apply the change.
e. When creating workflows, be sure to assign Capture actions to the Live Store
corresponding to the server where the action resides. For example, assign
Capture actions on LSL-01 to the LSL-01 Live Store (\\LSL-01\d\live\store).
When to Run Copy and Move Actions on Local or on Any Server
If the Live Store is a local path, then a Copy or Move action following a Capture action in
a workflow should always run on the same machine as the Capture action.
If the Live Store is a UNC path, then Copy or Move actions downstream from a Capture
action can run on any machine in the Vantage domain, assuming an array license is
present.
Lightspeed Live Capture User Guide
Configuring the Lightspeed Live Capture Server and Apps
Store
Location Type
D:\Live\Store Live
D:\Live\Store Live
D:\Live\Store Live
Configuring Settings for Your Facility
Alias
\\LSL-01\d\live\store
\\LSL-02\d\live\store
\\LSL-03\d\live\store
73