Prerequisites To Using Tape Capture - Telestream Lightspeed Live Capture User Manual

168 Using the Tape Capture Web Application

Prerequisites to Using Tape Capture

Prerequisites to Using Tape Capture
To use the Tape Capture web application, you must already have a Lightspeed Live
Capture system installed and connected to VTRs or other sources. This system must
also include the Lightspeed Tape Capture web app, which will allow you to control
VTRs, create clips, and capture the clips into corresponding media files. Most VTRs and
video sources capable of SDI I/O and RS-422 control can be used.
Some components need to be set up before you can begin configuring and using the
Tape Capture web application. For instructions, see
and
To install the Tape Capture web application, see
Capture Web
After the prerequisites, you will need to perform these tasks to complete connections
and configurations:
■
■
For additional details, open the Help menu (?) from the upper right corner of the
applications, or the circled (M) in action inspectors.
Configuring Ingest Sources.
Apps.
Configuring the VTR Connection
Creating and Activating the Tape Action Workflow
Configuring Settings for Your Facility
Installing the Live Capture & Tape
Lightspeed Live Capture User Guide