Video Stream Details; Codec - Telestream Lightspeed Live Capture User Manual

264 Appendix B: Containers, Codecs, and Vantage Actions
MPEG2-TS Output
Transport ID. (Default 0.) Specifies the ID number for this transport stream.
PAT Version. (Default 0.) Specifies the version number of the Program Association
Table.
Program Number. (Default 1.) Specifies the ID number of a specific program.
PMT PID. (Default 480.) This sets the Packet ID used for the Program Map Table.
PCR PID. (Default unselected/zero.) Specifies the Packet ID that carries the Program
Clock Reference for this program. Set to the first video PID value if not specified.
Maximum PCR Interval. (Default 37 ms.) Specifies the maximum time between
Program Clock References for this stream.
PCR on every PES header. When checked, inserts a PCR in each packet that has a PES
header.
No Empty Adaptation Fields. When checked, forces the Multiplexer to avoid using
zero-length adaptation field video packets.
VBR Transport stream. When checked, the Multiplexer creates a VBR transport stream;
no attempt is made to maintain the bit rate.
Error Behavior. (Default: Fail on error.) Specifies how the action responds to an error.
Error/Warning Threshold. (Default 1.) Specifies the number of errors before the action
enters the error state and the number of warnings that trigger a Fail on Warning or
Error. This parameter has no effect when Error Behavior is set to Always Complete.
Treat Buffer Underflows/Overflows as Errors. When checked, buffer underflow or
overflow warnings are treated as errors.
2-Pass Multiplexing. When checked, performs 2-pass multiplexing. Only use if you
need to correct excessive bitrate fluctuations in the encoded stream resulting in video
decoder underflow errors. The second pass is only executed if the first pass fails.
Generate Config File. Generates and places a Manzanita-compliant configuration file
using the current settings into the same location as the output. The configuration file
can be utilized in the IPTV transcoder action or in other actions that utilize Manzanita
configuration files.

Video Stream Details

Select the Video Stream component to display its options on the right.

Codec

Generate Config File. Specifies which codec to use to encode the output file.
Lightspeed Live Capture User Guide