Telestream Lightspeed Live Capture User Manual page 329

4. In the Capture action, set a Manual Trigger, and configure the trigger:
–
Check the Enable VDCP control check box.
–
Set the VDCP Port number to match the device port where you connected the
automation machine.
–
Check the Set Base Name with VDCP Cue Command, if desired.
5. Activate the Capture workflow, and test the interface by sending each of the
commands listed in the next topic.
Lightspeed Live Capture User Guide
Appendix C: RS-422 VTR Interface
Video Disk Communications Protocol (VDCP)
329