Creating A Stitched Clip - Telestream Lightspeed Live Capture User Manual

192 Using the Tape Capture Web Application
Using the Tape Capture Web App

Creating a Stitched Clip

The Clip Stitching feature allows you to create a list of clips from one or more tapes,
arrange the clips in the order in which they will be stitched together, capture all the
clips to individual files, and then create a stitched output file (or files) containing all
captured clips in the order specified.
Note: When clips or tapes have different frame rates, the job will stop at the stitch
location where the frame rate changes. Frames rates must be the same for stitch
operations to complete successfully.
Follow these steps to create a Stitched Clip:
1. In the Vantage Workflow Designer, open the Tape action to configure it. (See
2. In the Tape action Settings panel, enable the Stitch Clips option by binding it to a
3. In the Tape action, set the Stitch Behavior to Direct Convert or Reference Movie
Note: Clip Stitching is only supported for MXF OP1a, QuickTime, and MP4 outputs.
4. When the Tape action workflow is fully configured, Activate the workflow.
5. In the Tape Capture user interface, create the list of clips you want to log, either by
6. When your Clip Log is complete, select the Clip Stitch Order button
Creating and Activating the Tape Action Workflow
True variable. (To bind variables in the Tape action, see
Configuration Parameters.)
(Reference Movie is the default) and enable "Is Output Stitched" if desired. See the
Tape action Settings Panel.
using the Mark In > Mark Out > Log method, or by importing an EDL file.
the Clip Stitch Order dialog. The Clip Stitch Order dialog allows you to order the
clips the way you want them to appear in the stitched output file. The clips can be
for more details.)
Binding Variables to
Lightspeed Live Capture User Guide
to open