Telestream Lightspeed Live Capture User Manual page 184

184 Using the Tape Capture Web Application
Tape Capture Controls and Operation Status
From Capture Clips you can make these selections for the capture operation:
Primary Output Configuration—Select a container configuration that was added in
the Tape action for the Primary Output. The configuration names are in alphabetical
order and the full name is displayed.
Output Location—Select a Vantage Folder Address Book entry or select Follow
Workflow Specification to use the location set in the Tape action workflow.
Secondary Output Configuration—Select a container configuration that was added
or enabled in the Tape action for the Secondary Output. The configuration names are in
alphabetical order and the full name is displayed.
To add Primary and Secondary outputs, see
Activate Capturing
When you click Capture in the Capturing Clips dialog, the dialog closes and Capturing
starts and the blue Capture button in the top bar changes to
recording operation.
Monitoring Capturing
When a capture is in progress, the Clip Log indicates which clip is currently recording
and which clips are submitted to be recorded. The time that has elapsed during the
recording operation is displayed, along with a progress circle.
Primary and Secondary
Lightspeed Live Capture User Guide
Outputs.
during the