Telestream Lightspeed Live Capture User Manual page 193

moved up or down either by drag-and-drop or by using the up/down arrows next
to each clip.
7. After the clips have been ordered, adjust any other parameters, as needed.
8. Click the Capture button to open the Capture Clips dialog. Select the Configuration
method and Output Location, and then click Capture.
9. The Tape Capture app will begin recording and capture the clips in the log into
corresponding final output media files.
If there are multiple tapes, the Tape Capture app will ask you to insert the first tape
when you start the capture. When the tape completes, the Tape Capture app
selects the next tape in the log list, and indicates that tape needs to be inserted.
You must then insert the tape and press the "Capture" button to resume the cap-
ture (the button will be yellow and read "Resume").
10. Once all individual clips have been captured from all tapes, the system
automatically creates a Primary output of individual clips and a stitched clip, or
clips, depending on your workflow settings.
11. The Primary and Secondary files can be processed by any downstream action in the
same way they are in the non-stitched mode.
Lightspeed Live Capture User Guide
Using the Tape Capture Web Application
Using the Tape Capture Web App
193