Configuring Clip Stitching - Telestream Lightspeed Live Capture User Manual

188 Using the Tape Capture Web Application
Using the Tape Capture Web App
6. Pick one of the two alternatives below as your next step:
7.
8. Click Log to create the clip and add it to the Clip Log.

Configuring Clip Stitching

Clip Stitching allows you to create an MP4 reference file of source clips from multiple
tapes, and arrange the clips in the order you want to stitch them together. During
capture, individual files are created of each clip. When capture from all tapes is
complete, the MP4 reference file is created with the clips in the order they were
arranged in the Clip Ordering dialog.
To configure Clip Stitching, follow these steps:
1. Clip Stitching needs to be enabled in the Capture action, and the workflow must be
2. In the Tape Capture user interface, create a clip list for each tape, either using
3. 4.Select the 'Clip Ordering' button to open the dialog that provides the ability to
4. 5.Set the Timecode Override value, if desired. If Timecode Override is not enabled
5. 6.Select any other configuration setting.
6. 7.Select Capture.
7. a.The UI will capture just, like it does in the non-Stitching mode, by asking for the
8. b.After all clips for that Tape have been capture the UI will ask that the next Tape be
9. 8.When complete the system will output an MP4 reference file that contains
Click the Mark Out button to mark the ending timecode of your clip. The dura-
tion is calculated automatically.
Optionally, instead of marking an out point, you can enter a duration after marking
in, and the ending timecode will be calculated for you.
Click the metadata button to open the Configure Labels dialog to access and
modify metadata contained in any Label added to the Tape action (if any).
activated. See...XREF [ insert screenshot below, like in Bill's doc? ]
manual IN/OUT/LOG or by importing an EDL. This is done for every tape that will be
included in the MP4 reference file.
arrange the clips in the order that you want them to appear in the MP4 reference
file. The clips could be moved up/down either by drag/drop or by using up/down
arrows. [ insert image ]
in the Tape action, the output clip will have an initial timecode of 01:00:00;00.
first Tape by Name and wait for confirmation that the tape has been inserted into
the VTR. After confirmation the UI will control the VTR and capture each of that
Tape's clips in linear TC order.
inserted and the same process detailed in step 6a is executed. This process will
continue until all clips from all Tapes have been captured into individual files.
references to all of the clips in the order that they we arranged in the Clip Ordering
dialog.
Lightspeed Live Capture User Guide