Configuring A File Loop Source - Telestream Lightspeed Live Capture User Manual

Configuring a File Loop Source

The File Loop Configure Source dialog opens when you create or edit a File Loop source.
Note: File Loops are intended for test purposes only.
The File Loop Configure Source dialog provides these options:
•
Name—Specifies the name of the File Loop.
•
Path—Specifies the path for the looping file source.
•
Max Time-Shift—Sets the size of the internal Time-Shift buffer that may be used to
delay the source.
•
Force 8 Bit Video—Forces the source to be 8 bit instead of 10 bit regardless of orig-
inal source.
•
Assign Processor—Assign this source and its dependents to a single processor.
When on, all processing is assigned to a single multi-core CPU socket. This prevents
inefficient mapping of processes across CPU sockets during heavy loads, such as
when all four inputs are being processed. Works for SD/HD sources only, not 4K.
•
Use Inverse Telecine—Sets the source to be de-interlaced using Inverse Telecine
settings.
•
Simulate Deck—Simulates a VTR tape deck. Only available when
is enabled. Available only in Advanced Mode (System Settings).
•
Cisco ID3—Enable to allow the SCTE-104 information to be converted to ID3 on
output. This option can also be turned off or on from Live Capture when configur-
ing SDI sources, see Cisco ID3 in the Configuring SDI Source Options topic in the
Lightspeed Live Capture User Guide. Available only in Advanced Mode.
Lightspeed Live Capture User Guide
Configuring the Lightspeed Live Capture Server and Apps
Managing and Configuring Sources
63
Advanced mode