X265/Hevc - Telestream Lightspeed Live Capture User Manual

- Main
- High
- High 10
- High 4:2:2
Bit Rate (in kbps)
- Between 512 and 50,000
Command Line (option)
Configure the compressor using x264 command line syntax. For setting specific x264
parameters, you can enter x264 CLI commands (separated by spaces) to execute them.
For best results, be sure to use long form: --bframe 5, for example. Use of short form (-b
5) is not recommended.
The following x264 command line parameters are not supported:
--fake-interlaced
--nal-hrd cbr
--profile
--video-format
--bitrate

x265/HEVC

Note: x265/HEVC supports progressive scan inputs only.
Supported Container
- QuickTime
- TIFO
Profile
- Main
- Main 10
- Main 10 Intra
Bit Rate (in kbps)
- Between 512 and 300,000
Command Line (option)
Configure the compressor using x265 command line syntax. For setting specific x265
parameters, you can enter x265 CLI commands (separated by spaces) to execute them.
Lightspeed Live Capture User Guide
Appendix B: Containers, Codecs, and Vantage Actions
Primary Output - Video Codecs
301