Panasonic Avc-Intra; Panasonic Avc-Ultra; Sony Xavc; Sony Xdcam - Telestream Lightspeed Live Capture User Manual

Appendix B: Containers, Codecs, and Vantage Actions 261
MXF OP1a Output
End of Packet Header Markers. When checked, EPH marker segments are generated.
Start of Packet Markers. When checked, SOP marker segments are generated.
CUDA Memory Limit. Specifies the CUDA memory limit in MB.
Note: When the CUDA Memory Limit is set to 0, GPU processing is disabled.
CUDA Tile Limit. Specifies the CUDA tile limit.
Encoder Queue Size. Specifies the encoder queue size.
Encode Less VBI. When checked, the codec removes the top 32 lines for SD sources
that contain VBI data, ignoring more VBI lines in favor of frame size, in both NTSC and
PAL. In NTSC (512), the video is 486 lines; in PAL (608), the video is 576 lines.

Panasonic AVC-Intra

Quality. Specifies the quality setting to use for encoding.

Panasonic AVC-Ultra

Quality. Specifies video quality profile: AVC Ultra Long GOP 25 | AVC Ultra Long GOP 50

Sony XAVC

Quality. Specifies the quality setting to use for encoding.

Sony XDCAM

Quality. Specifies the quality setting to use for encoding.

Uncompressed

Encode Less VBI. When checked, the codec removes the top 32 lines for SD sources
that contain VBI data, ignoring more VBI lines in favor of frame size, in both NTSC and
PAL. In NTSC (512), the video is 486 lines; in PAL (608), the video is 576 lines.

x264

Profile. Specifies the profile to use for encoding.
Bit Rate. Specifies the bit rate, in kbps.
Command Line. Enables you to optionally configure the codec using x264 command
line syntax. For setting specific x264 parameters, you can enter x264 CLI commands
(separated by spaces) to execute them. For best results, be sure to use long form.
Lightspeed Live Capture User Guide