Telestream Lightspeed Live Capture User Manual page 134

134 Creating Capture & Tape Action Workflows
Creating and Activating the Tape Action Workflow
4. Open the Tape action inspector and make these selections:
5. Make selections in the
6. When finished with Tape action configuration, click Save.
7. Click Activate to start the workflow. This workflow must be running to connect the
Source—Select an input source.
Channel Group—Select a Channel (Nexus) Group.
Expected Labels—Select labels you created, if any, to contain metadata. When
selected, they are available to configure in the Tape Capture web application.
Primary and Secondary Outputs
described previously.
user interface to the VTRs.
and the Settings Panel
Lightspeed Live Capture User Guide