Configuring Vdcp Control - Telestream Lightspeed Live Capture User Manual

328 Appendix C: RS-422 VTR Interface
Video Disk Communications Protocol (VDCP)

Configuring VDCP Control

Follow these steps to configure VDCP control of the Capture action:
1. In the Vantage Management Console, select Capture Inventory in the left panel.
2. Select a Capture Channel (source) in the Capture Inventory panel.
3. In the Configuration tab at the bottom of the Capture Inventory panel, check
(enable) the VDCP check box.
Lightspeed Live Capture User Guide