Revision History - Omron E5*C Series User Manual

Revision History

Revision History
A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
Cat. No.
Revision code
01
02
03
04
05
06
07
08
09
10
11
12
13
14
14
H174-E1-14
Date
December 2011 Original production
January 2012 Page 9: Made correction in Precautions for Safe Use.
December 2012 • Made changes accompanying the addition of programless
communications and component communications (version 1.1).
• Added E5EC/E5AC Digital Controllers with position-proportional control
and E5AC Digital Controllers. (version 2.0).
• Corrected mistakes.
July 2013 • Added version 1.0 of the E5DC.
• Corrected mistakes.
December 2013 • Added E5CC-U.
• Improved autotuning for heating/cooling control.
• Added Mitsubishi FX-series PLCs and Keyence PLCs to information on
programless communications (version 2.1).
• Corrected mistakes.
April 2014 • Added version 2.2 of the E5GC.
• Added an analog input type and simple transfer function for the
E5CC-U (version 2.2).
• Corrected mistakes.
July 2014 • Added E5DC-U.
• Added simple transfer function and status message function to the
E5DC (version 2.2).
• Added seconds as the unit for the soak time (version 2.2).
• Added Lloyd's standards for the E5DC.
• Corrected mistakes.
August 2014 • Added the Valve Opening Monitor Selection and FB Moving Average
Count parameters for E5EC/E5AC-PR@-8@@ (version 2.2).
June 2015 Page 4-46: Changed figure for burnout at bottom of page.
Pages 5-55 and 6-89: Added note *5 and references to it in table.
Page 5-60: Changed level to Operation Level for Remote SP Monitor.
Page 5-61: Changed level in first sentence of Remote SP Monitor to
Operation Level.
Page 6-5: Added note below table for Changed Parameters Only.
Page 6-6: Added note above table for Parameter Mask Enable.
Page 6-30: Changed conditions given to right of "Manual Reset Value."
Page 6-56: Added note at bottom of page.
Page 6-70: Added note above table.
Page 6-93: Added note above table in Display Refresh Period.
March 2016 • Added information on version 2.1 of the E5@C-B.
• Corrected mistakes.
July 2016 • Corrected mistakes and added explanations.
October 2017 • Added E5@C-B Digital Controllers with current outputs.
• Corrected mistakes.
March 2018 • Added precautions for wiring of screw terminal block types.
April 2019 • Added information on version 2.2 of the E5DC-B.
• Corrected mistakes.
Revision code
Revised content
E5@C Digital Temperature Controllers User's Manual (H174)