Omron E5*C Series User Manual page 128

Digital temperature controllers
Hide thumbs Also See for E5*C Series:
Table of Contents

Advertisement

3 Part Names and Basic Procedures
E5GC
Temperature unit
Operation indicators
Press O Key once to go to
Adjustment Level.
Press O Key for at least 3 seconds
to go to Initial Setting Level.
Use M Key to change
to another parameter.
Displays
Name
No. 1 display
No. 2 display
No. 3 Display
(E5EC, E5EC-B, and
E5AC Only)
Temperature unit*
(Not provided on the
E5DC and E5DC-B.)
*
You can use the Y92S-L2 Unit Labels (sold separately) with the E5DC/E5DC-B.
Indicators
Operation indicators
3 - 6
Front panel
No. 1 display
PV or specified parameter
No.2 display
SP or specified parameter value
Use U D Keys to
set the parameter.
Use S Key to change the
digit (default setting).
Displays the process value or a monitor/setting item.
Displays the set point or the value of a monitor/setting item.
Displays the manipulated variable (valve opening), remaining soak time, multi-SP No.,
internal SP (ramp SP), or alarm value 1. (The value that is displayed is set in the PV/SP
Display Selection parameter in the Advanced Function Setting Level.)
Displays the temperature unit (C or F).
Name
Auxiliary outputs 1
Each indicator lights when the function that is assigned to
to 4 (Only the
corresponding auxiliary output (1 to 4) is ON.
E5CC, E5EC,
E5EC-B, and E5AC
support auxiliary
output 3.) (Only the
E5EC, E5EC-B,
and E5AC support
auxiliary output 4.)
Control outputs 1
Each indicator lights when the function that is assigned to
and 2 (Control
corresponding control output (1 or 2) is ON. (For a linear current
output 1: E5CC,
output, the indicator is not lit for values below 0%.)
E5CC-U, E5CC-B,
For a Position-proportional Model, OUT1 lights when the open
E5EC, E5EC-B, or
output is ON and OUT2 lights when the close output is ON.
E5AC only)
(Control output 2:
E5CC, E5EC, or
E5AC only)
Control output
Each indicator lights when the function that is assigned to
(E5DC, E5DC-B, or
corresponding control output is ON. (For a linear current output,
E5GC only)
the indicator is not lit for values below 0%.)
Communications
This indicator lights when wiring with communications is enabled.
writing
Left Side View of the E5GC
Bottom View of E5GC
Description
Description
E5@C Digital Temperature Controllers User's Manual (H174)
Left-panel
Setup Tool
port
Bottom-
panel
Setup
Tool port

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E5*C Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents