Omron E5*C Series User Manual page 165

Setting the Hysteresis
Set the hysteresis to 2.0°C.
Operating Procedure
1
Press the M Key several times in the Adjustment Level to
display hys (Hysteresis (Heating)).
2
Press the U or D Key to set the hysteresis to 2.0.
The default is 1.0.
The new set value can be saved by pressing the M Key, or it will go
into effect after 3 seconds has elapsed.
E5@C Digital Temperature Controllers User's Manual (H174)
4 Basic Operation
Adjustment Level
hys
Hysteresis
(Heating)
1.0
hys
2.0
4 - 23
4